purposes. Time to start looking at the sweeper mechanism
 |
| straight z with adjustable height |
 |
| collimator attached to light-pipe with 90 degree pipe |
I'm going to turn a DLP projector into a 3d rapid prototyping machine, and show you how along the way. The final goal is a complete diy guide.
1.3.14
Build updates
Added a mirror to the path moved the mirror from the path went back to top down with a slightly adjusted throw then rebuilt a light tube to allow for the led to be added and removed for testing
purposes. Time to start looking at the sweeper mechanism
In the picture above you can see the projector is finally mounted to the frame albeit temporarily I think this is becoming the final setup. The frame is likely to be moved around some more to make room for the z screw when it arrives and the sweeper.
I plan on adding a mechanical shutter on the collimator side, and attaching the power led to the shutter.
purposes. Time to start looking at the sweeper mechanism
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment